Impinj Speedway Revolution RFID Reader R220

Write a Review


Impinj Speedway R220 RFID readers deliver the performance, quality, and reliability necessary for item visibility platform solutions. The Speedway R220 RFID readers is available with 2 monostatic antenna ports optimized for Impinj reader antennas. Autopilot capability simplifies deployment and delivers more than 1,100 tag reads per second by automatically optimizing settings for the best, most reliable, and efficient performance.

The Speedway R220 RFID Reader continuously senses environmental RF noise and interference levels, automatically selecting appropriate reader configuration settings. IMPINJ Speedway Revolution 2-Port UHF RFID Reader senses where tags are in the field and automatically focuses more time on the antennas with the largest tag populations in view. Simple deployment is made possible via Power over Ethernet (PoE), with enterprise-class management and monitoring.

Ordering Options:

  • IPJ-REV-R220-EU12M1 - Speedway R220 (ETSI) without power supply / power cord

Accessory Options:

  • IPJ-A2003-000 - Impinj Universal Power Supply for Speedway RFID Readers
  • IPJ-A2051 - Impinj AC Power Cord for Speedway RFID Readers (Country Specific)
  • IPJ-A5000-000 - Impinj Speedway Revolution GPIO Box w. Cable
  • IPJ-A6001-000Impinj Speedway RFID Antenna Hub
  • Reader Antenna
  • Antenna Cable

What's included?

  • Impinj Speedway Revolution 2-Port UHF RFID Reader
  • 1 Year Factory Warranty
  • Impinj Power Supply and Line Cord If selected above.

How is the Impinj Speedway R220 Reader powered?

The Impinj Speedway R220 Reader can be powered using either PoE (Power over Ethernet) or an external power supply.

What is the maximum read range of the Impinj Speedway R7220 reader?

The maximum read range of the Impinj Speedway R220 reader depends on a variety of factors, including the size and type of RFID tag or label being used, the environment in which the reader is deployed, and the specific configuration settings used.

Is there an antenna hub available for the Impinj Speedway R220?

Yes, the Impinj Speedway RFID Antenna Hub IPJ-A6001-000 is available for Impinj R700.

What is the read accuracy of impinj speedway R220 reader?

Read accuracy depends on many factors including tag choice, environment, as well as placement and configuration of the readers. Most of our case studies cite greater than 95% - 99% read accuracy.

How many antennas can I connect at once to the Impinj R220?

The Impinj R220 is a UHF RFID reader that supports up to four antennas. You can connect up to four antennas to the Impinj R220, but the antenna hub enables solutions to easily connect up to 16 antennas to a single Impinj RAIN RFID reader.

What is the difference between the R220 and the R420?

The Impinj R220 and R420 are both UHF RFID readers, but there are some differences between the two models.

  • The R220 supports up to four antenna ports, while the R420 supports up to eight.
  • The R420 is designed for high-performance applications and can read tags at a higher speed than the R220.



RFID Readers in India

Impinj RFID Readers in India

View AllClose

Additional Information

GS1/EPCglobal UHF Gen2 (ISO 18000-6C) or RAIN RFID
865-868 MHz (ETSI)
+10.0 to +31.5 dBm (PoE) (EU1 limited to +30 dBm), +10.0 to +32.5 dBm (Listed/Certified power supply) (EU1 limited to +31.5 dBm, JP2 limited to 30 dBm)
-84 dBm
10/100BASE-T auto-negotiate (full/half) with auto-sensing MDI/MDX for auto-crossover (RJ-45),802.1x with PEAP/TLS and MD5 support, WPA for Wifi and Ethernet,3rd party Wifi adapters supported via USB interface, Speedway Connect (not included in Speedw
4 inputs, optically isolated 3-30V, 4 outputs, optically isolated, 0-30V, non-isolated 5V, 100mA supply (DB-15)
1 year limited warranty with purchase, option to extend
download data sheet:
View AllClose